خداع مقاتلة بالتحكم عن بعد
خداع مقاتلة بمقاس كامل على منصة دفع بالتحكم عن بعد، ليخرج من الحظيرة ويعيد تموضعه بقوته الذاتية.
- المقاس
- 1:1
- باع الجناح
- 11 m+
- المادة
- قماش مركّب عالي المتانة مع طلاء معدني نانوي
- زمن النشر
- 10–15 min
معرض صور المنتج
تفاصيل المنتج
طائرة مقاتلة قابلة للنفخ بمقياس كامل مع منصة قيادة بالتحكم الراديوي. يثبّت الهيكل الداخلي زاوية الجنحان وشكل الذيل الصحيحين مع بقائه خفيفاً بما يكفي لنقله من شخصين. وتحرّك المنصة الهدف بسرعة تصل إلى 60 كم/س داخل نطاق تحكم قدره 2 كم، وتعمل نحو ساعتين لكل شحن — بما يكفي لنقل الطائرات بين الحظائر خلال تمرين.
تُبنى أهداف الطائرات حول هيكل داخلي خفيف يثبّت زاوية الجنحان وشكل الذيل وحدود الحمولات، مع بقائه خفيفاً بما يكفي لشخصين. تُطبع تفاصيل فتحات السحب وإطار قمرة القيادة والفوهة على القماش لتبدو هيئة الطائرة صحيحة عبر المستشعرات البصرية والحرارية على مسافات المراقبة الواقعية.
أبرز المزايا
- تاكسي وإعادة تموضع بالتحكم عن بعد
- قمرة قيادة ومداخل هواء ومعدات هبوط مفصّلة
- قابل للنشر من حظيرة محصّنة
التطبيقات النموذجية
تضليل القواعد الجوية · تدريب التشتيت · عرض ثابت
المواصفات التقنية
| المقاس | 1:1 |
|---|---|
| باع الجناح | 11 m+ |
| المادة | قماش مركّب عالي المتانة مع طلاء معدني نانوي |
| زمن النشر | 10–15 min |
| عدد الأفراد | 3 |
| خيارات | منصة دفع بتحكم لاسلكي، مدى 2 كم · 60 كم/س · تشغيل 2 ساعة |
ما الذي يشمله التسليم
- Airframe hull with printed camouflage
- Electric inflation blower
- Rotor or propeller set where applicable
- Guy lines with ground anchors
- Repair patch kit and adhesive
- Transit and storage bag for each section
- Operation and maintenance manual
النشر الميداني
-
Select the dispersal position
Use the same ground, heading and spacing the real aircraft would use, so the pattern on imagery looks correct.
-
Lay out the airframe
Unroll the fuselage and wings on the outline and align the nose with the runway or hardstanding axis.
-
Inflate to pressure
Run the blower to working pressure — 12 to 15 minutes for a complete airframe.
-
Fit rotors or propellers
Attach and tension the rotor set or propellers so the silhouette matches the real aircraft from above.
-
Anchor and orient
Tension guy lines to the supplied anchors and check the attitude against the likely sensor direction.
-
Fit signature options
Install the heat source, radar reflector or motorised chassis if the exercise requires an active signature.
-
Recover and service
Deflate, fold into the section bags, and inspect seams and valves before storage.
الأسئلة الشائعة
أسئلة يطرحها المشترون حول خداع مقاتلة بالتحكم عن بعد.
Which aircraft can be reproduced?
Fighters, fighter-bombers, transport aircraft, utility and attack helicopters and unmanned air vehicles. Proportions and panel layout are taken 1:1 from the platform you are standing in for, including rotor diameter and blade droop for helicopters.
How long does deployment take?
12 to 15 minutes for a complete airframe with a two-person team. Helicopters with a full rotor set take the upper end of that range.
Can the decoy move or change signature remotely?
Yes. A motorised chassis option moves the decoy between dispersal positions, and the remote-control option switches the infrared heat source and the movement system from up to 2 km away, so the position appears to stay active.
Does it defeat radar as well as optical sensors?
The metallic coating option gives an adjustable radar cross-section matched to the airframe, and the heat source option reproduces the infrared signature. Both are specified per aircraft type rather than applied generically.
How is it held down in wind?
Guy lines and ground anchors are supplied as standard. Anchoring points follow the airframe outline, so the decoy keeps its correct attitude rather than collapsing to one side.
Can it be used for a specific exercise scenario?
Yes. Markings, serials, squadron insignia and national camouflage schemes are printed to order, and decoys can be supplied as a set covering a dispersal or a full flight line.
What is the service life?
More than 200 inflation cycles in field conditions, with field repair from the supplied patch kit.
الطلب والتسليم
- الحد الأدنى للطلب
- من مجموعة واحدة — يمكن دمج طرازات مختلفة في حاوية واحدة
- مدة تجهيز العينة
- 72 ساعة للأنماط الجاهزة
- المستندات
- مستندات العطاء وتقارير الاختبار وشهادة المنشأ
- التخصيص
- التمويه وعلامات الوحدات والشارات وخيارات البصمة
- عمر الخدمة
- أكثر من 200 دورة نفخ في ظروف الميدان
- وقت التسليم والدفع
- يُؤكَّد وقت التسليم وشروط الدفع عند الاستفسار
أخبرونا بالمنصات التي تحتاجون إلى محاكاتها وسنؤكد المواصفات ووقت التسليم وشروط الدفع كتابيًا.
استفسر عن هذا المنتجمنتجات ذات صلة
أرسل لنا قائمة منصاتك
أخبرنا بالمركبات أو الطائرات أو مجموعات الرادار التي تحتاج إلى حمايتها، وسنعيد إليك التكوين والمدة الزمنية وعرض سعر التصدير.


